MITIPLUG

Pick BLASTBAG™ SOLO when you're running surface benches and want the most-used aerosol gas bag on the market. Self-contained, single-operator deploy, no extra gear — ~30 seconds per hole. Two-speed actuator lets you inflate slow or fast depending on the situation. Sizes from 4.5" to 12.25" (114 – 311 mm) cover every standard production hole. Class 9 DG — stores and ships under aerosol rules.

Pick BLASTBAG™ EVO when you want aerosol convenience without the SKU sprawl. Two sizes — Hawk (4" – 6") and Eagle (6" – 9⅞") — cover most surface holes, so you stock less and make one decision on the bench instead of four. Single bladder seals against the hole wall; pressure sleeve controls inflation speed. Class 9 DG.

Pick BLASTBAG™ ACE II when storage or transport rules make aerosol products a hassle, or when you're running metal-detector conveyors that throw false trips. Chemical reaction inflation — no aerosol, no metal components, non-DG. Same air-deck performance as SOLO and EVO, just delivered through a controlled chemical reaction instead of pressurized gas. Sizes 3" through 10⅝" (76 – 270 mm).

Pick BLASTBAG™ AERO when you're underground with service air lines available. Compressed-air operated, dual-bladder construction, snap-on coupling for fast connect/disconnect. Works in any direction — up holes, down holes, even underwater. Sizes 2.5" through 12.25" (64 – 311 mm). Best-seller in underground and the cleanest install when air is already on site. Non-DG.

Pick BLASTBALL™ when the hole is wet or you've got breakthroughs and cracks to seal. The only inflatable in this collection rated for wet-hole deployment — lower it through water on a drop line, then inflate with compressed air. Reinforced rubber bladder with nylon webbing handles -58°F to 185°F (-50°C to 85°C). Sizes 2.5" to 8" (64 – 203 mm). Underground development specialist.

Pick MITIPLUG™ when you're loading emulsion or ANFO into underground upholes and need a mechanical plug that creates an air deck AND retains the column. Flexible pilgrim-hat fins fold back on insertion, then lock in place — and the fins let gas through. Revised design includes downline protection. Fits 2.5" to 4" (64 – 102 mm). The most popular plug for underground emulsion upholes.

Pick ROCKRIVET™ when you need to create a controlled air deck on a trim or pre-split row, or hold the charge column with maximum retention and downline pass-through. Collet-style fins bite the hole wall and don't walk, twist, or shift. Iron ore case study: 38% smaller P80 fragment size with ROCKRIVETS installed. Sizes 3" to 9" (76 – 230 mm), rigid for heavier loads, semi-rigid for tighter holes.

Pick SLUMPSTOPPA™ when you're loading emulsion in underground upholes and need a gas-permeable retention device to hold the column without compromising the gassing reaction. Polymer bristles with a stainless steel spine hold the column while letting emulsion gas through. Fits 2.5" to 4.5" (64 – 115 mm). The dedicated emulsion-slump solution for underground upholes.